Support

Avaya

To Set Time on Avaya ACS phones:

  1. Go to Station 10 or 11
  2. Leave the phone on the hook!
  3. Press the Feature Button Dial 0 0 (Display should read "Program Extension")
  4. Press far left-hand Intercom button two (2) times (Display should read "System Program")
  5. Dial "#103" (Display should read "System Time" + "Data and current time")
  6. Enter “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
  7. Press the Feature Button Dial 0 0 (Display should read correct time and date.
  8. This will exit programming and put your phone back into normal operation.)
  9. Finished!

To Set Date on Avaya ACS phones:

  1. Go to Station 10 or 11
  2. Leave the phone on the hook!
  3. Press the Feature Button
  4. Dial 0 0 (Display should read "Program Extension")
  5. Press far left-hand Intercom button two (2) times (Display should read "System Program")
  6. Dial "#101" (Display should read "System Date" + "Data and current date")
  7. Enter the date in the format of MM DD YY. (FOR EXAMPLE, 1/12/04 = "011204" and this would equal January 12, 2004).
  8. Press the Feature Button
  9. Dial 0 0 (Display should read correct time and date. This will exit programming and put your phone back into normal operation.)
  10. Finished!

top

Comdial

To Set Time on Comdial FXII digital phones:

  1. Go to Station 10
  2. Leave the phone on the hook!
  3. Press the Intercom Button (Usually Blue in color)
  4. Dial * # 0 *01
  5. Enter the date in the format of YY MM DD. (FOR EXAMPLE, 1/12/03 = "030112" and this would equal January 12, 2003) THEN, AT THE same time, AND ON THE SAME LINE, ENTER “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
  6. Press #
  7. Press Speaker
  8. Finished!

To Set Date and Time on Comdial DSU/DSUII digital phones:

  1. Go to Station 10
  2. Leave the phone on the hook!
  3. Press the Intercom Button (Usually Blue in color)
  4. Dial * # 0 1
  5. Enter the date in the format of YY MM DD. (FOR EXAMPLE, 1/12/03 = "030112" and this would equal January 12, 2003) THEN, AT THE same time, AND ON THE SAME LINE, ENTER “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
  6. Press #
  7. Press Speaker
  8. Finished!

To Turn Night Mode "On" and "Off" on Comdial digital phones:

  1. Go to Station 10
  2. Leave the phone on the hook!
  3. Press the Intercom Button (Usually Blue in color)
  4. Dial * # 0 3
  5. Press "1" to put into Night Mode" or Press to put into Day Mode.
  6. Press Speaker
  7. Finished!

To Set Speed Dial and / or Transfer Dial on Comdial digital phones - (This will transfer a call to Voice Mail, a Car Phone, or anywhere else!):

  1. Leave the phone on the hook!
  2. Press “Options” and “Next” to reach your choice - - ADIAL (For Buttons) or SDIAL (For Dial Pad Keys)
  3. Select “Adial” or “Sdial”
  4. At “Location” Prompt = Press Desired Button or Dial Pad Key
  5. At “Line” Prompt = Select “0” (For any available line).
  6. At “Number” Prompt = Press “Tap”, “Hold” and then dial the phone number as you would normally dial it, then press #.
  7. Select “Save”
  8. Press "Speaker"
  9. Finished!

To Check and / or Set Baud Rate on Comdial digital phones:

  1. Leave the phone on the hook!
  2. Press "Intercom * # 746 * 15 1 (View Port & Baud) Press "Intercom * # 746 * 15 1 06 (Sets Baud to 2.4kb) Press Speaker Finished!

To Set Up Voice Mail & Other Buttons on Comdial digital phones:

  1. Leave the phone on the hook!
  2. Press "Intercom * * 1 - Then, For:
  3. Voice Mail: Press 6 + 1st V.M. ATI-D Port.
  4. Nite: Press desired button Intercom * # 03.
  5. Page: Press desired button, dial Intercom 87.
  6. Press T/C
  7. Press Speaker
  8. Finished!

top

Mitel

To Set Time on Mitel digital PBX phones:

  1. Go to Attendant Super Console 1000
  2. Leave the phone on the hook!
  3. Press the Function Button
  4. Press the softkey under "ATT Function" (F 2 key)
  5. Press the softkey under "Set Time" (F 2 key)
  6. Display should say, "Enter Time (HH:MM)="
  7. Enter “military time” (24-hour clock)for example, (9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
  8. Press the softkey under "Set" (F 2 key)
  9. Finished!

To Set Date on Mitel digital PBX phones:

  1. Go to Attendant Super Console 1000
  2. Leave the phone on the hook!
  3. Press the Function Button
  4. Press the softkey under "ATT Function" (F 2 key)
  5. Press the softkey under "Set Date" (F 3 key)
  6. Display should say, "Enter Date (DD/MM/YY)="
  7. 5. Enter the date in the format of DD / MM / YY. (FOR EXAMPLE, 1/12/04 = "120104" and this would equal January 12, 2004)
  8. Press the softkey under "Set" (F 2 key)
  9. Finished!

top

Trillium

To Set Time on Trillium Panther P II telephones:

  1. Go to Station 10
  2. Leave the phone on the hook!
  3. Press the "Program Button"
  4. Dial 0 7
  5. Enter “military time” (24-hour clock)(9 a.m. =0900; 1 p.m. = 1300; 4 p.m. = 1600)
  6. Press "*" 7.
  7. Finished!

To order, or for more information, call us...

top